Volkswagen Taos Forum banner

Wheel bolt size?

1599 Views 4 Replies 3 Participants Last post by  Xponential
Good day fine folks!

I was wondering if someone could help me out with the information regarding the bolt size for the wheels. The reason I am asking is because I have a set from my wife’s old 2014 C Class aftermarket wheels and I was hoping I could use them for the Taos so I wouldn’t end up buying them unnecessarily.

Cheers
Richard.
1 - 5 of 5 Posts
Bolt size only? Not bolt spacing and wheel offset?
Bolt size only? Not bolt spacing and wheel offset?
Not the bolt pattern I’m after. The physical bolts/lugs information. I’ve got the rest of it sorted out. I just know that if I go with aftermarket wheels I’ll need non oem bolts/lugs because the seat is different on the hardware.
M14 x 1.5mm, 27mm thread length should be right. I presume you need a conical seat for the aftermarket wheels...
  • Like
Reactions: 1
M14 x 1.5mm, 27mm thread length should be right. I presume you need a conical seat for the aftermarket wheels...
Yes, thank you.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top